Bem-vindo ao Homenet Electronic Technology Co.,LTD

Produtos

Contate-Nos

Você está aqui:Casa >> Produtos >> SFP Transceiver

SFP Transceiver

10G XFP BIDI 20KM

●Supports 9.95 to 11.3Gb/s bit rates
●Simplex LC Connector
●Hot-pluggable XFP footprint
●Uncooled 1270nm DFB transmitter, 1330nm PIN photo-detector 
●Uncooled 1330nm DFB transmitter, 1270nm PIN photo-detector
●Applicable for 20km SMF connection
●Low power consumption, < 1.8W
●Digital Diagnostic Monitor Interface
●XFP MSA package
●Operating case temperature: 
Commerical:0 to 70 °C 
   Industrial:-20 to 80 °C 
 

    Applications

    ●10GBASE-LR at 10.3125Gbps

    ●10GBASE-LW at 9.953Gbps  

    Other optical link

    Product Descriptions

     The XFP Bidi is compliant with the IEEE803.3ae 10Gbase-Bx. and transmission distance up to 20km on SMF .The transceiver module comprises a transmitter with a 1270 or 1330nm DFB laser transmitter, an integrated 1330 or 1270nm detector preamplifier(IDP) mounted in an optical header and a limiting post-amplifier IC. Transmitter and receiver are separate within a wide temperature range of 0to +70for commercial temperature, -40 to 80 °C for industrial temperature, and offers optimum heat dissipation and excellent electromagnetic shielding for 10 GbE systems application.                              

    Absolute Maximum Ratings

    Parameter

    Symbol

    Min.

    Max.

    Unit

    Note

    Supply Voltage

    Vcc

    -0.5

    4.0

    V

     

    Storage Temperature

    TS

    -40

    85

    °C

     

    Relative Humidity

    RH

    0

    85

    %

     

     

    Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the transceiver.

    General Operating Characteristics

    Parameter

    Symbol

    Min.

    Typ

    Max.

    Unit

    Note

    Data Rate

    DR

    9.95

    10.3125

    11.3

    Gb/s

     

    Supply Voltage

    Vcc

    3.13

    3.3

    3.47

    V

     

    Supply Current

    Icc5

     

     

    500

    mA

     

    Operating Case Temp.

    Tc

    0

     

    70

    °C

     

    TI

    -20

     

    80

     

     

    Electrical Characteristics (TOP(C) = 0 to 70 , TOP(I) =-20 to 80 ,VCC = 3.13 to 3.47 V)

    Parameter

    Symbol

    Min.

    Typ

    Max.

    Unit

    Note

    Transmitter

    Differential data input swing

    VIN,PP

    120

     

    820

    mVpp

     

    Transmit Disable Voltage

    VD

    2.0

     

    Vcc

    V

    1

    Transmit Enable Voltage

    VEN

    Vee

     

    Vee+0.8

     

    Input differential impedance

    Rin

     

    100

     

    Ω

    2

    Transmit Disable Assert Time

    Tda

     

     

    10

    us

     

    Receiver

    Differential data output swing

    Vout,pp

    340

     

    850

    mVpp

    3

    Output rise time and fall time

    Tr, Tf

     

     

    38

    Ps

    4

    LOS Fault

    VLOS_F

    VCC-0.5

     

    Vcc

    V

    5

    LOS Normal

    VLOS_N

    Vee

     

    Vee+0.5

    V

    5

     

    Notes:

    1. Or open circuit.

    2. After internal AC coupling.

    3. Into 100 ohms differential termination.

    4. 20 – 80 %.

    5. Loss Of Signal is open collector to be pulled up with a 4.7k~ 10k resistor to 3.15 – 3.6V.

    Logic 0,indicates normal operation; logic 1 indicates no signal detected.

     

    Optical Characteristics (TOP(C) = 0 to 70 , TOP(I) =-20 to 80 ,VCC = 3.13 to 3.47 V)

    Parameter

    Symbol

    Min.

    Typ

    Max.

    Unit

    Note

    Transmitter

    Operating Wavelength

    λ

    1260

    1270

    1280

    nm

     

    1320

    1330

    1340

     

    Ave. output power (Enabled)

    PAVE

    -3

     

    3

    dBm

    1

    Side-Mode Suppression Ratio

    SMSR

    30

     

     

    dB

     

    Optical Modulation Amplitude

    POMA

    -2.8

     

    0

    dB

    OMA

    Extinction Ratio

    ER

    4

    4.5

     

    dB

     

    RMS spectral width

    Δλ

     

     

    0.45

    nm

     

    Rise/Fall time (20%~80%)

    Tr/Tf

     

     

    45

    ps

     

    Dispersion penalty

    TDP

     

     

    3.2

    dB

     

    Relative Intensity Noise

    RIN

     

     

    -130

    dB/Hz

     

    Output Optical Eye

    Compliant with IEEE 0802.3ae

    Receiver

    Operating Wavelength

    λ

    1320

    1330

    1340

    nm

     

    1260

    1270

    1280

     

    Receiver Sensitivity(ER=4.5)

    PSEN1

     

     

    -12.6

    dBm

    2

    Receiver Sensitivity(ER=6)

    PSEN2

     

     

    -14.4

    dBm

    2

    Average Receive Power

    PAVE

     

     

    0.5

    dBm

     

    Receiver Reflectance

    Rrx

     

     

    -12

    dB

     

    LOS Assert

    Pa

    -30

     

     

    dBm

     

    LOS De-assert

    Pd

     

     

    -17

    dBm

     

    LOS Hysteresis

    Pd-Pa

    0.5

     

     

    dB

     

     

    Notes:

    1. Average power figures are informative only, per IEEE 802.3ae.

    2. Measured with worst ER; BER<10-12; 231 – 1 PRBS.

     

    PIN #

    Name

    Function

    Name/Description 

    Notes

    1

     

    GND

    Module Ground

    1

    2

     

    VEE5

    Optional -5.2V Power Supply (Not requireed)

     

    3

    LVTTL-I

    MOD_DESEL

    Module De-select; When held low allows the module to respond to 2-wire serial interface

     

    4

    LVTTL-O

    INTb

    Interrupt; Indicates presence of an important condition which can be read via the 2-wire serial interface

    2

    5

    LVTTL-I

    TX_DIS

    Transmitter Disable; Turns off transmitter laser output

     

    6

     

    VCC5

    +5V Power Supply (Not required)

     

    7

     

    GND

    Module Ground

    1

    8

     

    VCC3

    +3.3V Power Supply

     

    9

     

    VCC3

    +3.3V Power Supply

     

    10

    LVTTL-I/O

    SCL

    2-Wire Serial Interface Clock

    2

    11

    LVTTL-I/O

    SDA

    2-Wire Serial Interface Data Line

    2

    12

    LVTTL-O

    MOD_Abs

    Indicates Module is not present. Grounded in the Module

    2

    13

    LVTTL-O

    MOD_NR

    Module Not Ready; Indicating Module Operational Fault

    2

    14

    LVTTL-O

    RX_LOS

    Receiver Loss Of Signal Indicator

    2

    15

     

    GND

    Module Ground

    1

    16

     

    GND

    Module Ground

    1

    17

    CML-O

    RDN

    Receiver Inverted Data Output

     

    18

    CML-O

    RDP

    Receiver Non-Inverted Data Output

     

    19

     

    GND

    Module Ground

    1

    20

     

    VCC2

    +1.8V Power Supply (Not required).

     

    21

    LVTTL-I

    P_DOWN/RST

    Power down; When high, requires the module to limit power consumption to 1.5W or below. 2-Wire serial interface must be functional in the low power mode.

     

    21

    LVTTL-I

    P_DOWN/RST

    Reset; The falling edge initiates a complete reset of the module including the2-wire serial interface, equivalent to a power cycle.

     

    22

     

    VCC2

    +1.8V Power Supply (Not  required)

     

    23

     

    GND

    Module Ground

    1

    24

    PECL-I

    REFCLK+

    Not used, internally terminated to 50ohm (100ohm diff).

    3

    25

    PECL-I

    REFCLK-

    Not used, internally terminated to 50ohm (100ohm diff).

    3

    26

     

    GND

    Module Ground

    1

    27

     

    GND

    Module Ground

    1

    28

    CML-I

    TD-

    Transmitter Inverted Data Input

     

    29

    CML-I

    TD+

    Transmitter Non-Inverted Data Input

     

    30 

     

    GND 

    Module Ground 

    1

     

    Notes:

    Notes:

    1. Module circuit ground is isolated from module chassis ground within the module.

    2. Open collector; should be pulled up with 4.7k – 10k ohms on host board to a voltage between 3.15Vand 3.6V.

    3. Reference Clock input is not required.

     

    Management Interface  The SFP incorporates an XFP-compliant, two-wire management interface which is used for serial ID, digital diagnostics, and certain control functions. It is modeled on the SFF-8472 specification modified to accommodate a single two-wire interface address. In addition to the basic I2C read/write functionality, the modules support packet error checking that, when enabled, allows the host system to confirm the validity of any read data. Details of the protocol and interface are explicitly described in the MSA. Please refer to the MSA for design reference.The digital diagnostic memory map specific data field defines as following 

    Typical Interface Ciruit 

    Ordering Information

    Description

    XFP Bidi,9.95 to 11.3Gb/s, 1270/1330nm, 20km, 0~70, with Digital Diagnostic Monitor

    XFP Bidi,9.95 to 11.3Gb/s, 1330/1270nm, 20km, 0~70, with Digital Diagnostic Monitor

    XFP Bidi,9.95 to 11.3Gb/s, 1270/1330nm, 20km, -20~80, with Digital Diagnostic Monitor

    XFP Bidi,9.95 to 11.3Gb/s, 1330/1270nm, 20km, -20~80, with Digital Diagnostic Monitor

     

    Por favor, envie suas informações básicas, entraremos em contato o mais breve possível!

    *

    *

    *

    *

Produtos relacionados